Minor alterations

I finished the legs this morning. They are a little bit longer than I intended because I decided to give the puppet knees. I also added some Milliput to give the feet to make them stronger and to give them the right shape.

 

I added a washer the the foam at the base of the spine because I found that the wire had started to wear the foam away. I figured this was the simplest and fastest way of fixing the problem.

I reinforced the pelvis section of the armature with Milliput. I wouldn't normally do this but I felt that the epoxy glue I normally use was enough the cope with the stress of moving four legs and the spine on its own.

Foam

I started shaping the hard foam to accommodate the K&S armature sections. This is always the messiest part of the project for me. I know that in a weeks time I'll still be finding foam dust in my tool box. The piece of foam in the photo directly below will hold the pelvis of the armature.

 The piece of foam in the photo below will hold the torso section of the armature. I managed to break the foam during my first attempt so I had to re think how the K&S would sit inside the foam and what you see below is the second attempt.

I still need to shape the outside of the foam to give it a softer/friendlier shape. As you can see below the K&S fits quite snugly into the foam, all I need to do now is glue it into place.

The Armature

A few days ago I started to put together the armature.
I made a few changes to my original plan along the way like using K&S instead of electric block in the pelvis.
The majority of the pieces have been cut to the correct size but I have held back on gluing it all together. This is because I am unsure how far the armature will sit inside the foam I will be using to pad out the puppet. Once I have cut the foam to size I will make allowances in the wire to ensure the arms and legs are the correct length on the exterior of the puppet.

CW 2 Pre Production Minor Project

Well it's been a while but I'm finally blogging again.
The pages above are all pre-production for our latest project.
We were given a sound clip and a child's drawing and told to develop and then animate the character.

Advert Storyboard

The first half of CW1 was to choose an advert that was about thirty seconds long and then draw out the storyboards for that advert.

Glammies 2012 Best Dissertation Sting

This sting was for the Glammies 2013 best dissertation.
 
Animators          - James Stafford
                         - Courtney Fontanella

Puppet Maker     - Stephanie Howell

Character design - Tad Davies
 
Background Art   - Dan Harvey
                          - Bethan Davies

Wave

I thought I'd have a little bit of fun with Dinkleberry.